Aktualności
The strength of the Q-Cut family from LEUCO is the very good quality of cut. In addition, the saw blades for horizontal panel sizing saws have very long edge lives. Users appreciate the good price-performance ratio.
Saw blades from the Q-Cut family are used for single and stack cuts up to an 80 millimeter height of cut when finish-cut quality is required. The reason for this is the low-vibration tool body. As a result, operati-on is smooth; the cut edges are clean and chip-free.
Long edge lives in the standard assortment
The tungsten carbide cutting material used by LEUCO is breakage- and impact-resistant. That is why the edge lives are relatively long. Depending on the material, the saw blades last for up to 5,000 running meters.
These saw blades are part of the standard assortment and the purchase price is relatively low. Plants that use the saw blade are thrilled with the price-performance ratio.
Various versions for users
LEUCO has four versions of the Q-Cut family in the standard assortment:
- With the Q-Cut G6, LEUCO provides finished-cut quality in the diameter range of 280-520 millimeters.
- If reduced noise is required as well, the Q-Cut G6 nn-System is the correct choice.
- Whoever processes plywood, veneered wood-based materials, panels with sensitive top layers or lightweight panels should reach for the Q-Cut G5.
- The Q-Cut TR-F K for anti-fingerprint materials and plastics rounds out the finished-cut assortment from LEUCO.
Komunikaty w skrócie
-
31 maj 2024
Piły tarczowe , Nowości ze świata narzędzi
10 years nn-System: new era in the standard for circular saw blades -
2 maj 2024
Piły tarczowe , Rozwiązania
Saw blade HW TR-F-K at Schüco Interior Systems KG: Precise cutting in light metals -
6 gru 2023
Piły tarczowe , Nowości ze świata narzędzi
Interview: HW-panel sizing saw blade
“Q-Cut G6 Edition” with tool life -
25 paź 2023
Piły tarczowe , Nowości ze świata narzędzi
LEUCO nn-System DP flex -
Now with new topcoat coating -
29 wrz 2021
Narzędzia nasadzane , Narzędzia trzpieniowe , Piły tarczowe , Clamping Systems , Płytki obracane / wymienne, noże , Rozdrabniacze , Wiadomości ze świata LEUCO
LEUCO review, LIGNA.Innovation Network 2021 -
15 gru 2020
Piły tarczowe , Nowości ze świata narzędzi
Ostre skosy bez wyrwań dzięki nn-System DP flex -
10 lis 2020
Piły tarczowe , Nowości ze świata narzędzi
Rozcinanie tworzyw sztucznych wzmocnionych włóknem, piły do trudnych przypadków -
20 sie 2020
Wiertła , Narzędzia trzpieniowe , Piły tarczowe , Rozwiązania
Frezowanie, wiercenie, cięcie tworzyw sztucznych: Narzędzia i dane dot. zastosowania