Directly to the tool

Tool finder

Workpiece material

Machine

Applications

Features

Cutting circle diameter

Cutting circle diameter (inch)

Cutting width

Bore diameter

Bore diameter (inch)

No. of teeth

Tooth configuration

Cutting material group

LEUCO product names

To the product names

Articles found: 6

Your can restrict your selection by using the other filters!

Reset

Selection via tool type

Panel Sizing Saw Blades HW - Q-Cut "G6" - nn-System

Product

Drawing

  • Tungsten Carbide [HW]

Article

Description

Machine / Application

  • panel sizing saws
  • for finish cuts in veneered, foiled or melamine-laminated panels, in single sheets or in stacks up to 60 mm cutting height

Design

  • special nn-System gullet geometry
  • tooth configuration: G6
  • cutting material: HW HL Board 04 plus

Advantages

  • especially low noise level
  • noise reduction by up to approx. 6 dB(A) when idling
  • for highest performance demands
  • impressive cutting quality thanks to exact and precise cuts without chippings
  • reduced cutting pressure and power consumption thanks to optimized cutting geometry
  • clearly increased edge life thanks to improved HW grade

Notes

  • projection: min. 20 - 25 mm  max. 40 mm
  • NL**- Combi7 = 2/9/110 + 2/10/80 + 2/11/85 + 2/11/115 + 2/11/148 + 2/14/100 + 2/14/125 + 2/19/120

Table- and picture caption ...

Ø D
[mm] 		B
[mm] 		b
[mm] 		Ø d
[mm] 		Z NL Hook angle
[°] 		Tooth geometry LEUCODUR Machine/Type Ident-No. Comp./ Inqu.

Dimensions entered are not listed?
Please contact our application consulting .

available from stock
available on short notice
Delivery time on request

310 4,0 3 60 72 2/9/110 + 2/10/80 + 2/11/85 + 2/11/115 + 2/11/148 + 2/14/100 + 2/14/125 + 2/19/120 10 G6 HL Board 04 plus Homag (Holzma BR200) 193371 
|
310 4,4 3.2 60 72 2/9/110 + 2/10/80 + 2/11/85 + 2/11/115 + 2/11/148 + 2/14/100 + 2/14/125 + 2/19/120 10 G6 HL Board 04 plus Homag (Holzma BR200) 193190 
|
350 4,4 3.2 60 72 2/9/110 + 2/10/80 + 2/11/85 + 2/11/115 + 2/11/148 + 2/14/100 + 2/14/125 + 2/19/120 10 G6 HL Board 04 plus Homag (Holzma 72, 350, HPP 350) 193191 
|
380 4,4 3.2 60 72 2/9/110 + 2/10/80 + 2/11/85 + 2/11/115 + 2/11/148 + 2/14/100 + 2/14/125 + 2/19/120 15 G6 HL Board 04 plus Homag (Holzma) 193192 
|
380 4,8 3.5 60 72 2/9/110 + 2/10/80 + 2/11/85 + 2/11/115 + 2/11/148 + 2/14/100 + 2/14/125 + 2/19/120 15 G6 HL Board 04 plus Homag (Holzma 82, HPP 82, HPP 83, HPL 380) 193193 
|
450 4,8 3.5 60 72 2/9/110 + 2/10/80 + 2/11/85 + 2/11/115 + 2/11/148 + 2/14/100 + 2/14/125 + 2/19/120 15 G6 HL Board 04 plus Homag (Holzma 11510) 193194 
|