193191 - Panel Sizing Saw Blades HW - Q-Cut "G6" - nn-System
Product
Drawing
-
-
- Tungsten Carbide [HW]
-
Technical data
Description
Machine / Application
- panel sizing saws
- for finish cuts in veneered, foiled or melamine-laminated panels, in single sheets or in stacks up to 60 mm cutting height
Design
- special nn-System gullet geometry
- tooth configuration: G6
- cutting material: HW HL Board 04 plus
Advantages
- especially low noise level
- noise reduction by up to approx. 6 dB(A) when idling
- for highest performance demands
- impressive cutting quality thanks to exact and precise cuts without chippings
- reduced cutting pressure and power consumption thanks to optimized cutting geometry
- clearly increased edge life thanks to improved HW grade
Notes
- projection: min. 20 - 25 mm max. 40 mm
- NL**- Combi7 = 2/9/110 + 2/10/80 + 2/11/85 + 2/11/115 + 2/11/148 + 2/14/100 + 2/14/125 + 2/19/120
| Feature | Value | |
|---|---|---|
| Ø D = Cutting circle diameter | 350 [mm] | |
| B = Cutting width | 4,4 [mm] | |
| b = Body thickness | 3.2 [mm] | |
| Ø d = Bore diameter | 60 [mm] | |
| Z = No. of teeth | 72 | |
| NL = Pin holes | 2/9/110 + 2/10/80 + 2/11/85 + 2/11/115 + 2/11/148 + 2/14/100 + 2/14/125 + 2/19/120 | |
| Hook angle = Hook angle | 10 [°] | |
| Tooth geometry = Tooth configuration | G6 | |
| LEUCODUR = Cutting material | HL Board 04 plus | |
| L = Delivery Status | ||
| Machine/Type | Homag (Holzma 72, 350, HPP 350) | |
|
Dimensions entered are not listed?
available from stock |
||
suitable scoring saw blade
| Product picture | Description | Design | Ident-No. | ||
|---|---|---|---|---|---|
|
Scoring Saw Blades HW - adjustable "WS" | Ø125x4,0-4,8xØ45 Z=2x20 | 193257 | ||
|
Scoring Saw Blades HW "KO-F" - nn-System | Ø180x4,45-5,25xØ45 Z=36 | 192701 | ||
|
|
Scoring Saw Blades HW "KO-F" - nn-System | Ø200x4,45-5,25xØ45 Z=36 | 192704 | ||
|
Scoring Saw Blades HW "KO-HR" - nn-System | Ø180x4,45-5,25xØ45 Z=36 | 192689 | ||
|
|
Scoring Saw Blades HW "KO-HR" - nn-System | Ø200x4,45-5,25xØ45 Z=36 | 192694 | ||
|
Scoring Saw Blades HW "KO-WS" | Ø125x4,45-5,25xØ45 Z=20 | 192725 | ||
|
|
Scoring Saw Blades HW "KO-WS" | Ø180x4,45-5,25xØ45 Z=36 | 192734 | ||
|
available from stock |
|||||