168082 - Grooving Cutterheads HW
Technical data
Description
Machine / Application
- table shapers
- molders
- double end tenoners
- for chip-free grooving in solid woods and in wood-based panels
Design
Advantages
Notes
- application against feed with and across the grain
- cutting width 4 - 7.5 mm two-piece
- cutting width 4 - 15 mm three-piece
- cutting width adjustable with shims in 0.1 mm increments
- single cutterheads and spacers secured against rotation with pins
Feature | Value | |
---|---|---|
Ø D = Cutting circle diameter | 180 [mm] | |
B = Cutting width | 4,0-15 [mm] | |
Ø d = Bore diameter | 35 [mm] | |
Z = No. of teeth | 8+2+4 | |
Tmax = Maximum profile depth | 35 [mm] | |
DKN = Double keyway | 10x4 [mm] | |
nmin-nmax = RPM range | 4500-7400 [min-1] | |
L = Delivery Status | ||
Dimensions entered are not listed?
available from stock |
Turnover Knives
Product picture | Description | Design | Ident-No. | ||
---|---|---|---|---|---|
Turnover Spurs HW with 4 cutting edges and countersink | 14x14x1.2N | 163701 | |||
Turnover Knives HW with 2 cutting edges | 7,6x12x1.5N | 052543 | |||
Grooving Turnover Knives HW with 4 cutting edges - grooving cutterheads | 18x18x1.95N | 163699 | |||
available from stock |
Spare parts / accessories
Product picture | Description | Design | Ident-No. | ||
---|---|---|---|---|---|
Pressure Bars | B=7,2 | 168074 | |||
Set Screws - with hexagon socket and dog point | M5x12 DIN EN ISO 4028 | 050565 | |||
Spacer Sets | 70x3,5x35 | 168076 | |||
Screwdrivers with sliding handle for hexagon socket | SW2,5x100 | 168010 | |||
Screwdrivers with flag for Torx | T9 | 164344 | |||
Countersunk Screws - with Torx | M4x0,5x3,2 T9 D=Ø6 | 163925 | |||
Special Nuts | M4x0,5x2,2 | 163703 | |||
Special Nuts | M4x0,5x1,6 | 163704 | |||
available from stock |