Scraper Turnover Knives HW with 2 cutting edges - Homag (non-symmetrical location of positioning hole, chamfer to prevent material fracturing)
Article
Description
Machine / Application
- edge banding machines Homag Flexblade PN21
Design
- non-symmetrical profile and location of positioning hole
- special scraper which avoids material fracturing
- cutting material: HW
- HL Board 05 for wood-based panels, plastics and hard woods
Advantages
- no material fracturing also in the case of PP-edges
- no additional work steps needed
Notes
Dimension
[mm] |
R
[mm] |
Chamfer∡
[°] |
B
[mm] |
H
[mm] |
S
[mm] |
Ø d
[mm] |
Wedge∡
[°] |
LEUCODUR |
PU
[pc.] |
Machine/Type | Ident-No. | Comp./ Inqu. | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dimensions entered are not listed?
available from stock |
|||||||||||||
12x20x2 R1 | 1,0 | 12 | 20 | 2 | 4,0 | 83 | HL Board 05 | 2 | Homag | 185854 | |||
12x20x2 R1,5 | 1,5 | 12 | 20 | 2 | 4,0 | 83 | HL Board 05 | 2 | Homag | 185855 | |||
12x20x2 R2 | 2,0 | 12 | 20 | 2 | 4,0 | 83 | HL Board 05 | 2 | Homag | 185856 | |||
12x20x2 R2,5 | 2,5 | 12 | 20 | 2 | 4,0 | 83 | HL Board 05 | 2 | Homag | 185857 | |||
12x20x2 R3 | 3,0 | 12 | 20 | 2 | 4,0 | 83 | HL Board 05 | 2 | Homag | 185858 | |||
12x20x2 R4 | 4,0 | 12 | 20 | 2 | 4,0 | 83 | HL Board 05 | 2 | Homag | 185859 | |||
12x20x2 R5 | 5,0 | 12 | 20 | 2 | 4,0 | 83 | HL Board 05 | 2 | Homag | 185860 | |||
12x20x2 45° | 45 | 12 | 20 | 2 | 4,0 | 83 | HL Board 05 | 2 | Homag | 187128 |