Shank-Type Cutters with HW Turnover Knives - t3-System
Product
Drawing
-
- Tungsten Carbide [HW]
- MEC
Article
Description
Machine / Application
- CNC and joinery machines
- For offset- and chip-free jointing, rabbeting and sizing of solid wood
Design
- Rounded triangular turnover knives with cutting edges drawing from bottom to top and from top to bottom
- Cutting material: HW
- HL Solid 20 for hard wood and soft wood
- HL Board 06 for wood-based materials, plastics and hard woods
- topcoat coating for increased edge lives
Advantages
- absolutely chip-free jointing and rabbeting
- Thanks to the rounded turnover knives the machined surface is offset-free
- excellent edge and surface quality
- very high milling performance
- spiral plunge-cutting for free form milling
- Triangular turnover knives with rounded edges 3 edge lives
Notes
- spiral plunge-cutting, pockets larger than Ø 60
- feed rate per tooth fz = 0.2-0.5 mm
- turnover knife 9209773 scoring without projection, suitable for jointing without groove
|
Ø D
[mm] |
L2
[mm] |
Ø d
[mm] |
L3
[mm] |
L1
[mm] |
Z |
nmax
[min-1] |
L/R |
Number of cutting edges
[pc.] |
Ident-No. | Comp./ Inqu. | |
|---|---|---|---|---|---|---|---|---|---|---|---|
|
Dimensions entered are not listed?
available from stock |
|||||||||||
| 54 | 78 | 20 | 52 | 133.5 | 2+2 | 12,000 | R | 14 | 187268 | ||
| 54 | 63 | 25 | 52 | 120 | 2+2 | 22,000 | R | 12 | 187299 | ||
| 54 | 78 | 25 | 52 | 133.5 | 2+2 | 18,000 | R | 14 | 187300 | ||
| 54 | 106,5 | 25 | 52 | 162.5 | 2+2 | 15,000 | R | 18 | 187113 | ||
| 61 | 79,1 | 25 | 52 | 139.2 | 2+2 | R | 14 | 187330 | |||