Directly to the tool


Workpiece material

Machine

Applications

Features

LEUCO product names

Reset


Selection via tool type


187299 - Shank-Type Cutters with HW Turnover Knives - t3-System

Product

Drawing

  • Tungsten Carbide [HW]
  • MEC

Comp./ Inqu. |

Technical data

Description

Machine / Application

  • CNC and joinery machines
  • For offset- and chip-free jointing, rabbeting and sizing of solid wood

Design

  • Rounded triangular turnover knives with cutting edges drawing from bottom to top and from top to bottom
  • Cutting material: HW
  • HL Solid 20 for hard wood and soft wood
  • HL Board 06 for wood-based materials, plastics and hard woods
  • topcoat coating for increased edge lives

Advantages

  • absolutely chip-free jointing and rabbeting
  • Thanks to the rounded turnover knives the machined surface is offset-free
  • excellent edge and surface quality
  • very high milling performance
  • spiral plunge-cutting for free form milling
  • Triangular turnover knives with rounded edges 3 edge lives

Notes

  • spiral plunge-cutting, pockets larger than Ø 60
  • feed rate per tooth fz = 0.2-0.5 mm
  • turnover knife 9209773 scoring without projection, suitable for jointing without groove
Feature Value
Ø D = Cutting circle diameter 54 [mm]
L2 = Cutting width 63 [mm]
Ø d = Shank diameter 25 [mm]
L3 = Shank length 52 [mm]
L1 = Total length 120 [mm]
Z = No. of teeth 2+2
nmax = maximum RPM 22,000 [min-1]
L/R = cutting direction R
Number of cutting edges 12 [pc.]
L = Delivery Status

Dimensions entered are not listed?
Please contact our application consulting .

available from stock
available on short notice
Delivery time on request

Turnover Knives

Product picture Description Design Ident-No. Comp./ Inqu.
Turnover Knives HW with 3 cutting edges and countersink - with rounded edges 20,88x18.3x3.0N 187694
|
Turnover Knives HW with 3 cutting edges and countersink - with rounded edges 20,88x18.3x3.0N 187692
|
Turnover Knives HW with 3 cutting edges and countersink - with rounded edges 20,88x18.3x3.0N 187251
|
Turnover Knives HW with 3 cutting edges - with rounded edges 20,38x17.9x3.0N 9209773
|

available from stock
available on short notice
Delivery time on request

Spare parts / accessories

Product picture Description Design Ident-No. Comp./ Inqu.
Screwdrivers with spinner handle for Torx T15x80 171188
|
Countersunk Screws - with Torx M5x10,8 T15 D=Ø9,4 180840
|

available from stock
available on short notice
Delivery time on request

Downloads