80477110 - PowerTec 5 airFace Hoggers DP for LEUCO s-System Ø 192 mm (DZ)
Product
Drawing
-
-
- Polycrystalline diamond [DP]
- MEC
Technical data
Description
Machine / Application
- double end tenoners
- for chip-free and low-noise sizing of raw, melamine-coated, paper-laminated, foil-coated and veneered wood-based materials as well as HPL materials, with a focus on durability and economic efficiency
Design
- LEUCO airFace design: reduced vibration and aerodynamic properties
- polished cutting edges for optimum cutting quality
- division of cut into with rounded edges on one wing
- resharpening area 4 mm
- n max= 7,200 rpm
Advantages
- very long edge live thanks to optimized tooth shape
- noise reduction during idling and machining thanks to airFace design
- cutting width and diameter consistency over the entire tool life
- high feed rates achievable
- low total cost/running meter ratio
- machining of panels from 8 mm thickness possible
- good chip removal
- compatible with a wide variety of clamping systems
Notes
- for double hogging process (DZ)
- application with feed
- sense of rotation according to VDMA 8849
| Feature | Value | |
|---|---|---|
| Ø D = Cutting circle diameter | 250 [mm] | |
| B = Cutting width | 10 [mm] | |
| b = Hub width | 17.8 [mm] | |
| Ø d = Bore diameter | 80 [mm] | |
| Z = No. of teeth | 20+10 | |
| Feed DZ = Recommended feed DZ | 45 [m/min] | |
| L/R = cutting direction | L | |
| L = Delivery Status | ||
|
Dimensions entered are not listed?
available from stock |
||
