Directly to the tool

Tool finder

Workpiece material

Machine

Applications

Features

Cutting circle diameter

Cutting width

Bore diameter

No. of teeth

Cutting material group

LEUCO product names

To the product names

Articles found: 24

Your can restrict your selection by using the other filters!

Reset

Selection via tool type

PowerTec 5 airFace Hoggers DP for LEUCO s-System Ø 160 mm and Ø 192 mm (DZ)

Product

Drawing

  • Polycrystalline diamond [DP]
  • MEC

Article

Description

Machine / Application

  • double end tenoners
  • for chip-free and low-noise sizing of raw, melamine-coated, paper-laminated, foil-coated and veneered wood-based materials as well as HPL materials, with a focus on durability and economic efficiency

Design

  • LEUCO airFace design: reduced vibration and aerodynamic properties
  • polished cutting edges for optimum cutting quality
  • division of cut into with rounded edges on one wing
  • resharpening area 4 mm
  • n max= 7,200 rpm

Advantages

  • very long edge live thanks to optimized tooth shape
  • noise reduction during idling and machining thanks to airFace design
  • cutting width and diameter consistency over the entire tool life
  • high feed rates achievable
  • low total cost/running meter ratio
  • machining of panels from 8 mm thickness possible
  • good chip removal
  • compatible with a wide variety of clamping systems

Notes

  • for double hogging process (DZ)
  • application with feed
  • sense of rotation according to VDMA 8849

Table- and picture caption ...

Ø D
[mm] 		B
[mm] 		b
[mm] 		Ø d
[mm] 		Z Feed DZ
[m/min] 		L/R Ident-No. Comp./ Inqu.

Dimensions entered are not listed?
Please contact our application consulting .

available from stock
available on short notice
Delivery time on request

250 10 17.8 60 16+8 28 R 80477091 
|
250 10 17.8 60 16+8 28 L 80477092 
|
250 10 17.8 60 20+10 45 R 80477093 
|
250 10 17.8 60 20+10 45 L 80477094 
|
250 10 17.8 60 28+14 60 R 80477095 
|
250 10 17.8 60 28+14 60 L 80477096 
|
250 10 17.8 60 36+18 80 R 80477097 
|
250 10 17.8 60 36+18 80 L 80477098 
|
250 14,5 17.8 60 16+8+4 28 R 80477099 
|
250 14,5 17.8 60 16+8+4 28 L 80477100 
|
250 14,5 17.8 60 20+10+5 45 R 80477101 
|
250 14,5 17.8 60 20+10+5 45 L 80477102 
|
250 14,5 17.8 60 28+14+7 60 R 80477103 
|
250 14,5 17.8 60 28+14+7 60 L 80477104 
|
250 14,5 17.8 60 36+18+9 80 R 80477105 
|
250 14,5 17.8 60 36+18+9 80 L 80477106 
|
250 10 17.8 80 16+8 28 R 80477107 
|
250 10 17.8 80 16+8 28 L 80477108 
|
250 10 17.8 80 20+10 45 R 80477109 
|
250 10 17.8 80 20+10 45 L 80477110 
|
250 14,5 17.8 80 16+8+4 28 R 80477111 
|
250 14,5 17.8 80 16+8+4 28 L 80477112 
|
250 14,5 17.8 80 20+10+5 45 R 80477113 
|
250 14,5 17.8 80 20+10+5 45 L 80477114 
|