80490648 - PowerTec 5s airFace Hoggers DP for LEUCO s-System Ø 192 mm (DZ)
Technical data
Description
Machine / Application
- double end tenoners
- ideally suited for chip-free and low-noise sizing of raw, melamine-coated, paper-laminated, foil-coated and veneered wood-based materials as well as HPL materials, with a focus on durability and economic efficiency
Design
- LEUCO airFace design: reduced vibration and aerodynamic properties
- polished cutting edges for optimum cutting quality
- division of cut into with rounded edges on one wing
- resharpening area 4 mm
- n max= 7,200 rpm
Advantages
- extremely long edge live thanks to optimized tooth shape and reinforced DP cutting edges
- noise reduction during idling and machining thanks to airFace design
- cutting width and diameter consistency over the entire tool life
- high feed rates achievable
- low total cost/running meter ratio
- machining of panels from 8 mm thickness possible
- good chip removal
- compatible with a wide variety of clamping systems
Notes
- for double hogging process (DZ)
- application with feed
- sense of rotation according to VDMA 8849
Feature | Value | |
---|---|---|
Ø D = Cutting circle diameter | 250 [mm] | |
B = Cutting width | 10 [mm] | |
b = Hub width | 17.8 [mm] | |
Ø d = Bore diameter | 80 [mm] | |
Z = No. of teeth | 28 | |
Feed DZ = Recommended feed DZ | 60 [m/min] | |
L/R = cutting direction | L | |
L = Delivery Status | ||
Dimensions entered are not listed?
available from stock |