193215 - Panel Sizing Saw Blades HW - U-Cut "WS"
Product
Drawing
-
-
- Tungsten Carbide [HW]
Technical data
Description
Machine / Application
- panel sizing saws
- double-end tenoners
- for sizing cuts in raw and veneered particleboard, hardboard, MDF panels and high-density plywood in single sheets and stacks
Design
- up to ØD=355, 10 degree hook angle and 15 degree corner angle
- from ØD=400, 15 degree hook angle and 10 degree corner angle
- tooth configuration: alternate top bevel "WS"
- cutting material: HW HL Board 04 plus
Advantages
Notes
- on double-end tenoners in combination with large hoggers
- NL**- Combi3 = 2/10/60 + 2/9/46 + 2/9,5/46,5 + 2/7/42
- NL**- Combi5 = 2/7/110 + 2/9/110 + 2/8,4/130 + 2/14/110 + 4/9/100 + 4/19/120
- NL**- Combi7 = 2/9/110 + 2/10/80 + 2/11/85 + 2/11/115 + 2/11/148 + 2/14/100 + 2/14/125 + 2/19/120
| Feature | Value | |
|---|---|---|
| Ø D = Cutting circle diameter | 320 [mm] | |
| B = Cutting width | 4,4 [mm] | |
| b = Body thickness | 3.2 [mm] | |
| Ø d = Bore diameter | 30 [mm] | |
| Z = No. of teeth | 50 | |
| NL = Pin holes | 2/10/60 + 2/9/46 + 2/9,5/46,5 + 2/7/42 | |
| Hook angle = Hook angle | 10 [°] | |
| Corner∡ = Corner angle | 15 [°] | |
| Tooth geometry = Tooth configuration | WS | |
| LEUCODUR = Cutting material | HL Board 04 plus | |
| L = Delivery Status | ||
| Machine/Type | Mayer, Format 4 | |
|
Dimensions entered are not listed?
available from stock |
||
suitable scoring saw blade
| Product picture | Description | Design | Ident-No. | ||
|---|---|---|---|---|---|
|
Scoring Saw Blades HW "KO-F" - nn-System | Ø200x4,45-5,25xØ65 Z=36 NL/DKN= 2/9/100 + 2/9/110 | 192706 | ||
|
Scoring Saw Blades HW "KO-HR" - nn-System | Ø200x4,45-5,25xØ30 Z=36 NL/DKN= 2/10/60 | 192692 | ||
|
|
Scoring Saw Blades HW "KO-HR" - nn-System | Ø150x4,45-5,25xØ30 Z=28 | 193219 | ||
|
Scoring Saw Blades HW "KO-WS" | Ø150x4,45-5,25xØ30 Z=24 | 192727 | ||
|
|
Scoring Saw Blades HW "KO-WS" | Ø200x4,45-5,25xØ30 Z=36 NL/DKN= 2/10/60 | 192741 | ||
|
available from stock |
|||||
