189113 - NF-Chop Saw Blades HW - neutral hook angle "TR-F"
Product
Drawing
-
-
- Tungsten Carbide [HW]
-
Technical data
Description
Machine / Application
- chop and miter saws
- table saws
- for clipping and mitre cuts in aluminum profiles
Design
- neutral hook angle
- tooth configuration: triple chip / flat "TR-F"
- cutting material: HW HL Board 06
Advantages
- burr-free cuts in profiles with low roughness
- noise-reduction thanks to laser ornaments
Notes
- tight workpiece clamping required
- Kaltenbach as counter-bore type
| Feature | Value | |
|---|---|---|
| Ø D = Cutting circle diameter | 550 [mm] | |
| B = Cutting width | 4,4 [mm] | |
| b = Body thickness | 3.8 [mm] | |
| Ø d = Bore diameter | 30 [mm] | |
| Z = No. of teeth | 126 | |
| NL = Pin holes | 2/10/70 | |
| Hook angle = Hook angle | 0 [°] | |
| Tooth geometry = Tooth configuration | TR-F | |
| LEUCODUR = Cutting material | HL Board 06 | |
| L = Delivery Status | ||
| Machine/Type | Elumatec, Kaltenbach, Rapid | |
|
Dimensions entered are not listed?
available from stock |
||
