NF-Chop Saw Blades HW - neutral hook angle "TR-F"
Article
Description
Machine / Application
- chop and miter saws
- table saws
- for clipping and mitre cuts in aluminum profiles
Design
- neutral hook angle
- tooth configuration: triple chip / flat "TR-F"
- cutting material: HW HL Board 06
Advantages
- burr-free cuts in profiles with low roughness
- noise-reduction thanks to laser ornaments
Notes
- tight workpiece clamping required
- Kaltenbach as counter-bore type
Ø D
[mm] |
B
[mm] |
b
[mm] |
Ø d
[mm] |
Z | NL |
Hook angle
[°] |
Tooth geometry | LEUCODUR | Machine/Type | Ident-No. | Comp./ Inqu. | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Dimensions entered are not listed?
available from stock |
||||||||||||
380 | 3,6 | 3 | 32 | 90 | 0 | TR-F | HL Board 06 | Elumatec | 189111 | |||
420 | 3,8 | 3.2 | 30 | 102 | 2/10/70 | 0 | TR-F | HL Board 06 | Rapid, Elumatec | 189074 | ||
500 | 4,0 | 3.4 | 30 | 114 | 2/10/70 | 0 | TR-F | HL Board 06 | Rapid, Elumatec | 189075 | ||
500 | 4,0 | 3.4 | 32 | 114 | 2/12/64 | 0 | TR-F | HL Board 06 | Eisele LMS SCA | 189076 | ||
550 | 4,4 | 3.8 | 30 | 126 | 2/10/70 | 0 | TR-F | HL Board 06 | Elumatec, Kaltenbach, Rapid | 189113 |