189883 - NF-Chop Saw Blades HW - positive hook angle "TR-F" topline
Product
Drawing
-
-
- Tungsten Carbide [HW]
-
Technical data
Description
Machine / Application
- table saws
- for dividing and miter cuts in aluminum and plastic profiles as well as for wood-based panels (Corian®, Noblan, Varicor® and HPL)
Design
- positive hook angle
- tooth configuration: triple chip / flat "TR-F"
- cutting material: HW HL Board 06
Advantages
- noise-reduction thanks to laser ornaments
Notes
- tight workpiece clamping required
| Feature | Value | |
|---|---|---|
| Ø D = Cutting circle diameter | 400 [mm] | |
| B = Cutting width | 3,8 [mm] | |
| b = Body thickness | 3.2 [mm] | |
| Ø d = Bore diameter | 40 [mm] | |
| Z = No. of teeth | 96 | |
| NL = Pin holes | 4/12/64 + 2/12/80 | |
| Hook angle = Hook angle | 5 [°] | |
| Tooth geometry = Tooth configuration | TR-F | |
| LEUCODUR = Cutting material | HL Board 06 | |
| L = Delivery Status | ||
| Machine/Type | Eisele LMS II, LMS III | |
|
Dimensions entered are not listed?
available from stock |
||
