192611 - Re-Cut Gang-Rip Saw Blades HW with HW-rakers "F" - HewSaw
Technical data
Description
Machine / Application
- multi-blade machines with or without chipper
- for longitudinal cuts in wet and dry soft woods
Design
- tooth configuration: flat "F"
- cutting material: HW HL Board 20
Advantages
- extremely high bending strength and hardness of the teeth
- tungsten carbide rakers prevent the sides of the wood from making contact with the steel plate
- staggering the types (A-C-A etc.) on the shaft creates a cut division that puts less pressure on the machine
Notes
Feature | Value | |
---|---|---|
Ø D = Cutting circle diameter | 351 [mm] | |
B = Cutting width | 4,4 [mm] | |
b = Body thickness | 3.2 [mm] | |
Ø d = Bore diameter | 70 [mm] | |
Max. flange Ø = Max. flange diameter | 130 [mm] | |
Z = No. of teeth | 24 | |
Number of rakers = Number of rakers | 2+2 [pc.] | |
Hook angle = Hook angle | 28 [°] | |
Tooth geometry = Tooth configuration | F | |
LEUCODUR = Cutting material | HL Board 20 | |
L = Delivery Status | ||
Machine/Type | HewSaw | |
Dimensions entered are not listed?
available from stock |