Re-Cut Gang-Rip Saw Blades HW with HW-rakers "F" - HewSaw
Product
Drawing
-
-
- Tungsten Carbide [HW]
Article
Description
Machine / Application
- multi-blade machines with or without chipper
- for longitudinal cuts in wet and dry soft woods
Design
- tooth configuration: flat "F"
- cutting material: HW HL Board 20
Advantages
- extremely high bending strength and hardness of the teeth
- tungsten carbide rakers prevent the sides of the wood from making contact with the steel plate
- staggering the types (A-C-A etc.) on the shaft creates a cut division that puts less pressure on the machine
Notes
|
Ø D
[mm] |
B
[mm] |
b
[mm] |
Ø d
[mm] |
Max. flange Ø
[mm] |
Z |
Number of rakers
[pc.] |
Hook angle
[°] |
Tooth geometry | LEUCODUR | Machine/Type | Ident-No. | Comp./ Inqu. | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Dimensions entered are not listed?
available from stock |
|||||||||||||
| 351 | 4,4 | 3.2 | 70 | 130 | 24 | 2+2 | 28 | F | HL Board 20 | HewSaw | 192611 | ||