Multi Scraper Turnover Knives HW - to prevent material fracturing for high gloss finish on PE/PVC/ABS
Article
Description
Machine / Application
- machines Homag with scraping unit Type MN 20 / MN 21
Design
- cutting edge with chamfer to prevent material fracturing
- cutting material: HW
- HL Board 06 for wood-based panels, plastics and hard woods
Advantages
- no material fracturing also in the case of PP-edges
- no additional work steps needed
- for high gloss finish
Notes
- Ident-No. [L] can be applied on the left lower or the right upper side
- Ident-No. [R] can be applied on the left upper or the right lower side
R
[mm] |
B
[mm] |
H
[mm] |
S
[mm] |
Ø d
[mm] |
LEUCODUR |
PU
[pc.] |
L/R | Remarks | Ident-No. | Comp./ Inqu. | |
---|---|---|---|---|---|---|---|---|---|---|---|
Dimensions entered are not listed?
available from stock |
|||||||||||
1; 1,5; 2; 3; 5 | 45,8 | 17.98 | 2 | 5,0 | HL Board 06 | 1 | L | Profile: 6-fold | 181239 | ||
1; 1,5; 2; 3; 5 | 45,8 | 17.98 | 2 | 5,0 | HL Board 06 | 1 | R | Profile: 6-fold | 181240 | ||
1; 1,5; 2; 2,5; 3 | 45,8 | 17.02 | 2 | 5,0 | HL Board 06 | 1 | L | Profile: 6-fold | 184670 | ||
1; 1,5; 2; 2,5; 3 | 45,8 | 17.02 | 2 | 5,0 | HL Board 06 | 1 | R | Profile: 6-fold | 184669 | ||
45°; 20°; 1; 1,3; 1,5; 2; 3 | 45,8 | 17.23 | 2 | 5,0 | HL Board 06 | 1 | L | Profile: 7-fold | 186683 | ||
45°; 20°; 1; 1,3; 1,5; 2; 3 | 45,8 | 17.23 | 2 | 5,0 | HL Board 06 | 1 | R | Profile: 7-fold | 186682 |