Scraper Turnover Knives HW with 2 cutting edges and radius - IMA (asymmetrical, chamfer to prevent material fracturing for high gloss finish on PE/PVC/ABS)
Product
Drawing
-
-
- Tungsten Carbide [HW]
Article
Description
Machine / Application
- edge banding machines IMA - Aggregate 08.516 and 08.519
- for use in scraper holders
- for scraping of standard edge bandings such as PP / PVC / ABS
- no material fracturing
Design
- non-symmetrical profile
- 15 degree profile run-out
- cutting edge with chamfer to prevent material fracturing
- cutting material: HW
- HL Board 05 for wood-based panels, plastics and hard woods
Advantages
- no material fracturing
- no additional work steps needed
- for high gloss finish
Notes
|
Dimension
[mm] |
R
[mm] |
B
[mm] |
H
[mm] |
S
[mm] |
Ø d
[mm] |
Wedge∡
[°] |
Profile run-out
[°] |
LEUCODUR |
PU
[pc.] |
Machine/Type | Ident-No. | Comp./ Inqu. | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Dimensions entered are not listed?
available from stock |
|||||||||||||
| 12x20x2 R0,8 | 0,8 | 12 | 20 | 2 | 4,0 | 83 | 15 | HL Board 05 | 2 | IMA | 184797 | ||
| 12x20x2 R1 | 1,0 | 12 | 20 | 2 | 4,0 | 83 | 15 | HL Board 05 | 2 | IMA | 184799 | ||
| 12x20x2 R1,3 | 1,3 | 12 | 20 | 2 | 4,0 | 83 | 15 | HL Board 05 | 2 | IMA | 184801 | ||
| 12x20x2 R1,5 | 1,5 | 12 | 20 | 2 | 4,0 | 83 | 15 | HL Board 05 | 2 | IMA | 184803 | ||
| 12x20x2 R2 | 2,0 | 12 | 20 | 2 | 4,0 | 83 | 15 | HL Board 05 | 2 | IMA | 184806 | ||
| 12x20x2 R2,5 | 2,5 | 12 | 20 | 2 | 4,0 | 83 | 15 | HL Board 05 | 2 | IMA | 184808 | ||
| 12x20x2 R3 | 3,0 | 12 | 20 | 2 | 4,0 | 83 | 15 | HL Board 05 | 2 | IMA | 184810 | ||