Planing knife HS for hydro and jointing
Article
Description
Machine / Application
- for use in hydro planing cutterheads
Design
- cutting material: HS for soft woods
- wedge angle 30° for jointing
- topcoat coating
Advantages
- high run-out accuracy due to grinding the knives in the hydro planing cutterhead with following jointing process in the machine
Notes
- from safety reasons please always mount knives with equal weight (packing unit VE) opposite each other
B
[mm] |
H
[mm] |
S
[mm] |
Wedge∡
[°] |
LEUCODUR |
PU
[pc.] |
Remarks | Ident-No. | Comp./ Inqu. | |
---|---|---|---|---|---|---|---|---|---|
Dimensions entered are not listed?
available from stock |
|||||||||
130 | 30 | 3 | 30 | HS | 2 | 182759 | |||
150 | 30 | 3 | 30 | HS | 2 | 182760 | |||
170 | 30 | 3 | 30 | HS | 2 | 182761 | |||
180 | 30 | 3 | 30 | HS | 2 | 182762 | |||
190 | 30 | 3 | 30 | HS | 2 | 182763 | |||
210 | 30 | 3 | 30 | HS | 2 | 182764 | |||
230 | 30 | 3 | 30 | HS | 2 | 182765 | |||
240 | 30 | 3 | 30 | HS | 2 | 182766 | |||
270 | 30 | 3 | 30 | HS | 2 | 182767 | |||
310 | 30 | 3 | 30 | HS | 2 | 182768 | |||
130 | 30 | 3 | 30 | HS | 10 | topcoat | 186007 | ||
150 | 30 | 3 | 30 | HS | 10 | topcoat | 186008 | ||
170 | 30 | 3 | 30 | HS | 10 | topcoat | 186009 | ||
180 | 30 | 3 | 30 | HS | 10 | topcoat | 186010 | ||
190 | 30 | 3 | 30 | HS | 10 | topcoat | 186011 | ||
210 | 30 | 3 | 30 | HS | 10 | topcoat | 186012 | ||
230 | 30 | 3 | 30 | HS | 10 | topcoat | 186013 | ||
240 | 30 | 3 | 30 | HS | 10 | topcoat | 186014 | ||
270 | 30 | 3 | 30 | HS | 10 | topcoat | 186015 | ||
310 | 30 | 3 | 30 | HS | 10 | topcoat | 186016 |