181234 - Scraper Turnover Knives HW with 2 cutting edges and radius - Homag,HOLZ-HER, Reich for high gloss finish (on PE/PVC/ABS)
Product
Drawing
-
-
- Tungsten Carbide [HW]
Technical data
Description
Machine / Application
- edge banding machines Homag PN10, Homag PN20 (to 2015-12-31), HOLZ-HER 1927/1929, Reich
- for use in scraper holders
Design
- 6 degree profile run-out
- special scraper which avoids material fracturing
- cutting material: HW
- HL Board 05 for wood-based panels and plastics
Advantages
- no material fracturing
- no additional work steps needed
- for high gloss finish
Notes
| Feature | Value | |
|---|---|---|
| R = Radius | 1,5 [mm] | |
| B = Width | 12 [mm] | |
| H = Height | 20 [mm] | |
| S = Thickness | 2 [mm] | |
| Ø d = Bore diameter | 4,0 [mm] | |
| Wedge∡ = Wedge angle | 83 [°] | |
| Profile run-out = Profile run-out | 6 [°] | |
| LEUCODUR = Cutting material | HL Board 05 | |
| PU = Packing unit | 2 [pc.] | |
| L = Delivery Status | ||
|
Dimensions entered are not listed?
available from stock |
||
