180021 - Scraper Knives HW with 2 cutting edges and radius - working centers
Technical data
Description
Machine / Application
- machines Homag combined with flush-cutting unit No. 1-056-11-0621
Design
- 6 degree profile run-out
- cutting material: HW
- HL Board 06 for wood-based panels, plastics and hard woods
- topcoat coating
- cutting edge with chamfer to prevent material fracturing
Advantages
- no material fracturing also in the case of PP-edges
- no additional work steps needed
Notes
Feature | Value | |
---|---|---|
R = Radius | 2,5 [mm] | |
B = Width | 20 [mm] | |
H = Height | 11.5 [mm] | |
S = Thickness | 2 [mm] | |
Ø d = Bore diameter | 5,0 [mm] | |
Profile run-out = Profile run-out | 6 [°] | |
LEUCODUR = Cutting material | HL Board 06 | |
PU = Packing unit | 2 [pc.] | |
L = Delivery Status | ||
Dimensions entered are not listed?
available from stock |