Turnover Knives HW with 4 cutting edges and countersink - Hundegger, surfCut cutterhead
Article
Description
Machine / Application
- machines Hundegger
- for use in cutterheads
Design
- cutting material: HW
- HL Board 06 for wood-based panels, plastics and hard woods
- HL Solid 20 for hard and soft woods
- HL Solid 30 for hard and soft woods
Advantages
- compared to uncoated HW-Turnover Knives the edge lives is 2 - 3 times as long
Notes
- packing unit 10 pieces
- Attention! it is not permitted to mount Ident-No. 186667 + 186668 togehter in one cutterhead. Danger of unbalance!
Dimension
[mm] |
B
[mm] |
H
[mm] |
S
[mm] |
Ø d
[mm] |
Type |
Wedge∡
[°] |
LEUCODUR |
PU
[pc.] |
Machine/Type | Remarks | Ident-No. | Comp./ Inqu. | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dimensions entered are not listed?
available from stock |
|||||||||||||
20,6 | 20.6 | 5.5 | 7,3 | 1 | 50 | HL Solid 30 | 10 | surfCut cutterhead | with rounded edges (R=172 mm) for Ø D=250-350 mm | 186667 | |||
21x21x5,5 | 21 | 21 | 5.5 | 7,3 | 1 | 50 | HL Solid 30 | 10 | Hundegger | with groove | 186668 | ||
11,95 | 11.95 | 1.5 | 4,0 | 2 | 55 | HL Board 06 | 10 | Hundegger | with rounded edges (R=70 mm) | 186448 | |||
13,8 | 13.8 | 2.5 | 6,2 | 2 | 60 | HL Solid 20 | 10 | surfCut cutterhead | with rounded edges (R=180 mm) for Ø D=300-350 mm | 184942 | |||
15 | 15 | 2.5 | 6,2 | 2 | 50 | HL Solid 20 | 10 | Hundegger | with rounded edges (R=170 mm) | 185367 | |||
15 | 15 | 2.5 | 6,2 | 2 | 50 | HL Solid 20 topcoat | 10 | Hundegger | with rounded edges (R=170 mm) | 80475550 |