184383 - p-System High-Performance Shank-Type Cutters CM DP

CNC stationary machines
for chip-free high-performance jointing and dividing of solid woods (free of knots) along and accross the grain
for jointing and dividing of melamine-, paper-, HPL-laminated, foiled and veneered panels and lacquered surfaces
Finish-quality in the case of fiber materials such as fabric-laminated panels, linoleum with jute fibers, cork etc.

Adjust the tool to run centrally to the workpiece
Tools with plunge tip (L4) must project at least 4.5 mm on bottom side of workpiece in order to bring p-System cutting edges into action
for inclined or circular plunge-cutting only
recommended feed rate per tooth (depending on the diameter): wood-based panels 0.2 - 0.3 mm, solid wood 0.15 - 0.2 mm
Clamping element: precision clamping element e.g. ps-System, TRIBOS
with thread for length adjusting screw
Sense of rotation according to VDMA 8849

	Feature	Value
	Ø D = Cutting circle diameter	25 [mm]
	L4 = Cuttind width 1	3.8 [mm]
	L2 = Cutting width	30,8 [mm]
	Ø d = Shank diameter	25 [mm]
	L3 = Shank length	55 [mm]
	L1 = Total length	110 [mm]
	Z = No. of teeth	2+2
	nmax = maximum RPM	24,000 [min-1]
	H = Wood thickness	27,8 [mm]
	Shear∡ = Shear angle	70 [°]
	Resharpening area = Resharpening area	2.5 [mm]
	L/R = cutting direction	R
	L = Delivery Status
	Remarks	symmetrical
Dimensions entered are not listed? Please contact our application consulting . available from stock available on short notice Delivery time on request