184082 - p-System High-Performance Jointing Shank-Type Cutters CM DP
Product
Drawing
-
-
- Polycrystalline diamond [DP]
- MEC
Technical data
Description
Machine / Application
- CNC stationary machines
- for chip-free high-performance jointing of solid woods (free of knots) along and accross the grain
- for jointing of melamine-, paper-, HPL-laminated, foiled and veneered panels and lacquered surfaces
- Finish-quality in the case of fiber materials such as fabric-laminated panels, linoleum with jute fibers, cork etc.
Design
- symmetrical and asymmetrical design
- non-convex design
- extremely scoring cut
- resharpening area 4 mm
Advantages
- maximum cutting quality and edge lives
- large depth of cut possible
- chip-free cuts even on the exit side
- perfectly suitable for laser-edge-technology
Notes
- with thread for length adjusting screw
- recommended feed rate per tooth: wood-based panels 0.55 mm, solid wood 0.28 mm
- crowned design on request
- clamping element: precision clamping element e.g. ps-System, TRIBOS
- sense of rotation according to VDMA 8849
| Feature | Value | |
|---|---|---|
| Ø D = Cutting circle diameter | 48 [mm] | |
| L2 = Cutting width | 38 [mm] | |
| Ø d = Shank diameter | 25 [mm] | |
| L3 = Shank length | 57.4 [mm] | |
| L1 = Total length | 105 [mm] | |
| Z = No. of teeth | 3+3 | |
| nmax = maximum RPM | 24,000 [min-1] | |
| Shear∡ = Shear angle | 70 [°] | |
| L/R = cutting direction | R | |
| L = Delivery Status | ||
| Remarks | symmetrical | |
|
Dimensions entered are not listed?
available from stock |
||
