185026 - Shank-Type Roughing Cutters DP
Product
Drawing
-
- Polycrystalline diamond [DP]
- MEC
Technical data
Description
Machine / Application
- CNC routers
- for sizing in roughing quality with chip-free cutting edges on both sides in solid woods and plywood, laminated wood-based panels and sandwich materials
- for cutting of cut-outs and contours
- traveling plunge cut using Z and X or Y axis
Design
- with alternating shear angle
- with DP plunge tip
- face cutting for diagonal plunge-cutting
- resharpening area ≥ 2.0 mm
- n max = 24,000 min-1
Advantages
- for long edge lives also in abrasive materials
- chip-free cutting edges on both sides
- high hogging volume
Notes
- slightly rough cutting surface due to fine cut division
- clamping elements: we recommend the use of the tools in high precision clamping chucks such as hydro expansion chucks "ps-System", TRIBOS or heat shrink-fit chucks
| Feature | Value | |
|---|---|---|
| Ø D = Cutting circle diameter | 20 [mm] | |
| L2 = Cutting width | 35 [mm] | |
| Ø d = Shank diameter | 20 [mm] | |
| L3 = Shank length | 60 [mm] | |
| L1 = Total length | 105 [mm] | |
| Z = No. of teeth | 2+2 | |
| nmax = maximum RPM | 24,000 [min-1] | |
| Resharpening area = Resharpening area | 2 [mm] | |
| L/R = cutting direction | R | |
| L = Delivery Status | ||
|
Dimensions entered are not listed?
available from stock |
||
