80482108 - Monolitic shank-type cutter HSK 63E with turnover knives - t3-System
Product
Drawing
-
- Tungsten Carbide [HW]
- MEC
Technical data
Description
Machine / Application
- CNC and joinery machines
- for shoulder- and chip-free jointing, rabbeting and sizing of soft and hard wood, glued laminated timber, wood and panel materials as well as gypsum board and hardwood laminated, beech veneer lumber
Design
- Triangular turnover knives with rounded cutting edges drawing from bottom to top and from top to bottom
- Monolitic design thanks to the removal of the interface
Advantages
- Absolutely chip-free jointing and rabbeting
- Thanks to the rounded turnover knives the machined surface is offset-free
- Excellent edge and surface quality
- Very high milling performance
- spiral plunge-cutting for free form milling
- Triangular turnover knives with rounded edges, 3 edge lives
- further optimization of the concentricity due to the removal of the interface
Notes
| Feature | Value | |
|---|---|---|
| Ø D = Cutting circle diameter | 80 [mm] | |
| L2 = Cutting width | 207,6 [mm] | |
| Ø d = Shank diameter | HSK 63E [mm] | |
| L1 = Total length | 280.5 [mm] | |
| Z = No. of teeth | 2+2 | |
| nmax = maximum RPM | 12,000 [min-1] | |
| L/R = cutting direction | R | |
| Number of cutting edges | 32 [pc.] | |
| L = Delivery Status | ||
|
Dimensions entered are not listed?
available from stock |
||
Turnover Knives
| Product picture | Description | Design | Ident-No. | ||
|---|---|---|---|---|---|
|
Turnover Knives HW with 3 cutting edges and countersink - with rounded edges | 20,88x18.3x3.0N | 187251 | ||
|
|
Turnover Knives HW with 3 cutting edges and countersink - with rounded edges | 20,88x18.3x3.0N | 187692 | ||
|
|
Turnover Knives HW with 3 cutting edges and countersink - with rounded edges | 20,88x18.3x3.0N | 187694 | ||
|
|
Turnover Knives HW with 3 cutting edges - with rounded edges | 20,38x17.9x3.0N | 9209773 | ||
|
available from stock |
|||||
