179500 - Combination Shank-Type Router Bits RH-LH DP - Z=3/1
Product
Drawing
-
- Polycrystalline diamond [DP]
- MEC
Technical data
Description
Machine / Application
- CNC routers
- for sizing and dividing cuts in raw, melamine-, paper-, HPL-laminated, foiled and veneered panels
- high-performance tool for pre- and finish-milling
Design
- Z=3 on right hand cutting section for highest feed rates
- Z=1 on left hand cutting section
- resharpenable area 3.2 mm
Advantages
- lower part of the cutter can be run in left hand rotation by adjusting the Z-axis and changing the direction of rotation; this allows optimum machining of frail edges utilizing only one spindle
Notes
- L2 eff. = L2 eff. = real cutting length; this tool has Z=3 the difference to L2 is Z=2; this allows the machining of all current panel boards
- workpiece secured on clamping blocks
- Clamping elements: ps-System, TRIBOS , draw-in collet chuck
- with thread for length adjusting screw
| Feature | Value | |
|---|---|---|
| Ø D = Cutting circle diameter | 25 [mm] | |
| L2 = Cutting width | 2x34 [mm] | |
| Ø d = Shank diameter | 25 [mm] | |
| L3 = Shank length | 62 [mm] | |
| L1 = Total length | 153 [mm] | |
| Z = No. of teeth | 3/1 | |
| L = Delivery Status | ||
| Remarks | L2 eff. 31 mm | |
|
Dimensions entered are not listed?
available from stock |
||
