187796 - UniTec Veneer Hoggers CM DP for LEUCO s-System Ø 160 mm and Bushing (RZ/DZ)
Technical data
Description
Machine / Application
- double end tenoners
- for chip-free sizing of veneered panels
Design
- DP-tipped
- resharpening area 4 mm
- n max = 6,000 min-1
- HS insert sets Z=2+2 for hogging of excess veneer
Advantages
- improved chip evacuation integrated into the tool (ChipMeister)
- reduced cleaning efforts
- high cutting quality for veneered panels due to division of cut
- long edge lives thanks to optimized tooth form
- low power consumption
- safe hogging of excess veneer
- no formation of strips
- no clogging of the exhaustion
Notes
- machining of 8 mm boards is also possible
- for scoring/hogging (RZ) and double hogging (DZ) process
- sense of rotation according to VDMA 8849
Feature | Value | |
---|---|---|
Ø D = Cutting circle diameter | 250 [mm] | |
B = Cutting width | 34-31,5 [mm] | |
B1 = Cutting width 1 | 10-7,6 [mm] | |
b = Hub width | 23 [mm] | |
Ø d = Bore diameter | 60 [mm] | |
Z = No. of teeth | 48+24 | |
Feed DZ = Recommended feed DZ | 60 [m/min] | |
L/R = cutting direction | R | |
L = Delivery Status | ||
Dimensions entered are not listed?
available from stock |
Turnover Knives
Product picture | Description | Design | Ident-No. | ||
---|---|---|---|---|---|
HS insert | N | 50570980 | |||
available from stock |