187787 - UniTec Hoggers CM DP for LEUCO s-System Ø 160 mm and Bushing (RZ/DZ)
Product
Drawing
-
- Polycrystalline diamond [DP]
- MEC
Technical data
Description
Machine / Application
- double end tenoners
- for chip-free sizing of raw, melamine-, paper-, HPL-laminated, foiled and veneered panels
Design
- Resharpening area: 5 mm
- n max=6,000 min-1
- division of cut in pre-cut and re-cut tooth
- constant cutting width
Advantages
- improved chip evacuation integrated into the tool (ChipMeister)
- reduced cleaning efforts
- reduced suction performance
- high quality of cut due to division of cut
- long edge lives thanks to optimized tooth form
Notes
- machining of 8 mm boards is also possible
- for scoring/hogging (RZ) and double hogging (DZ) process
- sense of rotation according to VDMA 8849
| Feature | Value | |
|---|---|---|
| Ø D = Cutting circle diameter | 250 [mm] | |
| B = Cutting width | 16 [mm] | |
| b = Hub width | 18 [mm] | |
| Ø d = Bore diameter | 60 [mm] | |
| Z = No. of teeth | 48+24+6 | |
| Feed DZ = Recommended feed DZ | 60 [m/min] | |
| L/R = cutting direction | R | |
| L = Delivery Status | ||
|
Dimensions entered are not listed?
available from stock |
||
