180955 - Scribing Cutterheads DP Postforming - Homag, IMA
Product
Drawing
-
- Polycrystalline diamond [DP]
- MEC
Technical data
Description
Machine / Application
- postforming machines Homag, IMA
- for scribing of the radii during the postforming process
Design
- exchangeable cutting edges
- straight cutter axis
- tooth configuration: symmetrical design for all radii
- n max = 9,000 min-1
Advantages
Notes
- for use without inlay strip
- application against feed
- LEUCODIA cutter inserts to be installed only in sets (packing unit 4 pieces)
- B=0.5 mm not recommended for butted-up workpieces; in this case B=1.2 mm should be used instead
- sense of rotation see drawing
| Feature | Value | |
|---|---|---|
| Ø D = Cutting circle diameter | 125 [mm] | |
| B = Cutting width | 0,8 [mm] | |
| L1 = Total length | 45 [mm] | |
| Ø d = Bore diameter | 20 [mm] | |
| Z = No. of teeth | 4 | |
| DKN = Double keyway | 6x3 [mm] | |
| nmax = maximum RPM | 9,000 [min-1] | |
| L/R = cutting direction | L | |
| L = Delivery Status | ||
|
Dimensions entered are not listed?
available from stock |
||
