184332 - p-System Jointing Cutters CM DP - MAN
Technical data
Description
Machine / Application
- table shaper
- for chip-free high-performance jointing of solid woods (free of knots) along and accross the grain
- for jointing and dividing of melamine-, paper-, HPL-laminated, foiled and veneered panels and lacquered surfaces
- Finish-quality in the case of fiber materials such as fabric-laminated panels, linoleum with jute fibers, cork etc.
Design
- symmetrical design
- non-convex design
- extremely scoring cut
- resharpening area 1.5 mm
Advantages
- maximum cutting quality and edge lives
- large depth of cut possible
Notes
- application against feed
- recommended feed rate per tooth: wood-based panels 0.8 mm, solid wood 0.4 mm
- crowned design on request
- sense of rotation according to VDMA 8849
Feature | Value | |
---|---|---|
Ø D = Cutting circle diameter | 125 [mm] | |
B = Cutting width | 28,2 [mm] | |
b = Hub width | 35.2 [mm] | |
Ø d = Bore diameter | 30 [mm] | |
Z = No. of teeth | 2+2 | |
Shear∡ = Shear angle | 70 [°] | |
nmin-nmax = RPM range | 6100-10500 [min-1] | |
L = Delivery Status | ||
Remarks | symmetrical | |
Dimensions entered are not listed?
available from stock |