178172 - Bushings for Finger Joint Cutters
Technical data
Description
Machine / Application
- for clamping of finger joint cutters and edge finger joint cutters
Design
- high-tensile steel body
- spacers Ø 97 mm for cutters Ø 160-210 mm (not required)
Advantages
- high concentric and runout accuracy
- for varying wood thicknesses
Notes
- fill intermediate sizes with spacers
- for cutter Ø 250 mm install at least one spacer Ø 177 on top and bottom
- fastening nut or hydraulic clamping for cutter attachment must be ordered separately
- for cutter sets over 100 mm height we recommend hydraulic clamping
- the bushing length depends on the wood height "H" and on the type of nut
- accessories: mounting device, mounting ring and wrench is imperative for self-resharpening
Feature | Value | |
---|---|---|
L = Length | 195 [mm] | |
Ø d = Adapter size on the machine side | 50 [mm] | |
Ø D = Diameter | 70 [mm] | |
L1 = Total length | 162 [mm] | |
L = Delivery Status | ||
Dimensions entered are not listed?
available from stock |
Spare parts / accessories
Product picture | Description | Design | Ident-No. | ||
---|---|---|---|---|---|
Mounting Devices | 177103 | ||||
Pin-type face wrenches | 177102 | ||||
Fastening Nut | M68x1,5x14 | 177104 | |||
Hydraulic Clumping Nuts | M68x1,5x56 | 178787 | |||
Screwdrivers with sliding handle for hexagon socket | SW4x100 | 166091 | |||
Spacers | Ø100x7,6xØ70 | 180940 | |||
Spacers | Ø100x11,4xØ70 | 180941 | |||
Spacers | Ø175x11,4xØ70 | 181034 | |||
Spacers | Ø175x7,6xØ70 | 186163 | |||
available from stock |