184923 - Edge Rounding Cutters DP HSK 25R - Homag FF, IMA
Product
Drawing
-
-
- Polycrystalline diamond [DP]
- MEC
Technical data
Description
Machine / Application
- edge banding machines Homag FF, IMA
- for chamfering of solid wood, veneer and plastic edge bands
Design
- polished face
- precise clearance angle
- with shear angle
- runout angle 15°
Advantages
- optimum cutting quality thanks to high concenctric accuracy and precise tool balancing
- optimized chip removal thanks to internal chip evacuation
- less chips remain inside of the machine
- no malfunctions due to chips
- reduction of suction power
- noise reduced
Notes
- constant basic dimensions a and D1
- Z = 4 for feed rate 20 - 30 m/min
- Z = 6 for feed rate 30 - 45 m/min
- machines must be equipped with i-System
- sense of rotation according to VDMA 8849
| Feature | Value | |
|---|---|---|
| R = Radius | 1,0 [mm] | |
| Ø D = Cutting circle diameter | 76 [mm] | |
| Ø D1 = Basis cutting circle diameter | 70 [mm] | |
| a = Distance to machine | 17.5 [mm] | |
| b = Hub width | 23 [mm] | |
| Ø d = Bore diameter | HSK 25R [mm] | |
| Z = No. of teeth | 4 | |
| L/R = cutting direction | L | |
| L = Delivery Status | ||
|
Dimensions entered are not listed?
available from stock |
||
