180558 - Edge Rounding Cutters DP HSK 25R - Homag FF, IMA
Technical data
Description
Machine / Application
- edge banding machines Homag FF, IMA
- for chamfering of solid wood, veneer and plastic edge bands
Design
- polished face
- precise clearance angle
- with shear angle
- runout angle 15°
Advantages
- optimum cutting quality thanks to high concenctric accuracy and precise tool balancing
- optimized chip removal thanks to internal chip evacuation
- less chips remain inside of the machine
- no malfunctions due to chips
- reduction of suction power
- noise reduced
Notes
- constant basic dimensions a and D1
- Z = 4 for feed rate 20 - 30 m/min
- Z = 6 for feed rate 30 - 45 m/min
- machines must be equipped with i-System
- sense of rotation according to VDMA 8849
Feature | Value | |
---|---|---|
R = Radius | 5,0 [mm] | |
Ø D = Cutting circle diameter | 84 [mm] | |
Ø D1 = Basis cutting circle diameter | 70 [mm] | |
a = Distance to machine | 21.5 [mm] | |
b = Hub width | 23 [mm] | |
Ø d = Bore diameter | HSK 25R [mm] | |
Z = No. of teeth | 4 | |
L/R = cutting direction | L | |
L = Delivery Status | ||
Dimensions entered are not listed?
available from stock |