187315 - Edge Rounding Trimming Cutters CM DP HSK 25R - Homag
Technical data
Description
Machine / Application
- edge banding machines Homag for aggregate BF40
- for rounding of solid wood, veneer and plastic edge bands
Design
- with shear angle
- polished face and high-finish clearance angle
- runout angle 13°
- n max = 24.000 min-1
Advantages
- optimum cutting quality thanks to high concenctric accuracy and precise tool balancing
- optimized chip removal thanks to ChipMeister version
- less chips remain inside of the machine
- no malfunctions due to chips
- reduced suction performance
- low noise level
Notes
- Z = 4 for feed rate 20 - 30 m/min
- sense of rotation according to VDMA 8849
- not for resharpening
Feature | Value | |
---|---|---|
R = Radius | 1,3 [mm] | |
Ø D = Cutting circle diameter | 70.57 [mm] | |
Ø D1 = Basis cutting circle diameter | 67,70 [mm] | |
a = Distance to machine | 21.78 [mm] | |
B = Cutting width | 20 [mm] | |
L1 = Total length | 24.3 [mm] | |
Ø d = Bore diameter | HSK 25R [mm] | |
Z = No. of teeth | 4 | |
nmax = maximum RPM | 24,000 [min-1] | |
L/R = cutting direction | L | |
L = Delivery Status | ||
Machine/Type | Homag | |
Dimensions entered are not listed?
available from stock |