185679 - DIAMAX Edge Rounding Cutters CM DP - Ott
Product
Drawing
-
-
- Polycrystalline diamond [DP]
- MEC
Technical data
Description
Machine / Application
- edge banding machines Ott
- for rounding and flush-cutting of solid wood, veneer and plastic edge bands
Design
- polished face
- high-finish clearance angle
- with shear angle
- n max = 24,000 min-1
Advantages
- optimized chip removal thanks to ChipMeister version
- less chips remain inside of the machine
- no malfunctions due to chips
- reduced suction performance
- low noise level
Notes
- constant basic dimensions a and D1
- sense of rotation according to VDMA 8849
| Feature | Value | |
|---|---|---|
| R = Radius | 2,0 [mm] | |
| Ø D = Cutting circle diameter | 69 [mm] | |
| Ø D1 = Basis cutting circle diameter | 61 [mm] | |
| a = Distance to machine | 9.72 [mm] | |
| b = Hub width | 10.5 [mm] | |
| Ø d = Bore diameter | 16 [mm] | |
| Z = No. of teeth | 4 | |
| DKN = Double keyway | 5x2,3 [mm] | |
| nmax = maximum RPM | 24,000 [min-1] | |
| L/R = cutting direction | L | |
| L = Delivery Status | ||
|
Dimensions entered are not listed?
available from stock |
||
