168814 - Adapters with cylindrical shank - saw blades, grooving cutters and cutters
Product
Drawing
Technical data
Description
Machine / Application
- for PS 2000-E and draw-in collet chuck for the mounting of tools with bore
Design
- tool attached and secured against rotation with screws
Advantages
Notes
- for right-hand and left-hand rotation
- for PS 2000-E, the length adjusting screw ID no. 172921 is required
- clamping length L2 = 30 and 36 mm for one-piece and multi-piece cutters and cutterheads
- clamping length L2 = 4 an 5 mm for circular saw blades and grooving tools
- Scope of delivery: Adapter for Lamello Clamex P® including 4 countersunk screws, all other adapters without countersunk screws. Screws of the required length must be ordered separately depending on the application.
| Feature | Value | |
|---|---|---|
| Ø d1 = Adapter size on the tool side | 25 [mm] | |
| L2 = Effective length | 30 [mm] | |
| Ø d = Adapter size on the machine side | 25 [mm] | |
| Ø D = Diameter | 60 [mm] | |
| L1 = Total length | 111 [mm] | |
| L3 = Shank length | 60 [mm] | |
| NL = Pin holes | 6/M6/48 | |
| Weight = Weight | 0.715 [kg] | |
| L = Delivery Status | ||
|
Dimensions entered are not listed?
available from stock |
||
