AEROTECH-System Uni-T with HSK 63F with collet chuck adapter
Article
Description
Machine / Application
- CNC machining centers
- for grooving, rabbeting in the case of pocket milling and dividing cuts as well as for the optimization of production processs e.g. with Nesting applications
- for tools with shank diameter up to 16 mm
Design
- tool adapter with internal clamping nut
- 9 wing design for the processing of particle board, MDF, OSB, hard wood etc.
- balance quality G=2.5
- n max. = 24,000 rpm
Advantages
- stopping of the chip flow
- cooling of the tool
- reduction of the dust quantity
- reduced efforts for cleaning and maintenance
Notes
- required for tool assembly: Wrench socket no. 184366 and torque wrench
- recommended: commercial torque wrench ½", alternatively torque wrench Z16 (No. 184890) and clip-on ratchet Z16 – ½" (No. 186109)
- tightening torque: 80 Nm
- sufficient vacuum performance is necessary for Nesting
- please observe the information in the operating instructions
Ø d1
[mm] |
Ø d
[mm] |
Ø D
[mm] |
L1
[mm] |
a
[mm] |
Remarks | Ident-No. | Comp./ Inqu. | |
---|---|---|---|---|---|---|---|---|
Dimensions entered are not listed?
available from stock |
||||||||
6-16 | HSK 63F | 105 | 125 | 100 | Standard | 186107 |