193241 - Trimming Saw Blades HW - with chip limiter "WS" - topline
Technical data
Description
Machine / Application
- Table saws
- Suitable for manual feed
- for sizing cuts in solid woods
- especially for knotty woods
Design
- tooth configuration: alternate top bevel "WS"
- cutting material: HW HL Board 20
Advantages
- no chipped edges from knots thanks to chip limiter
- noise-reduction thanks to laser ornaments
Notes
Feature | Value | |
---|---|---|
Ø D = Cutting circle diameter | 350 [mm] | |
B = Cutting width | 3,5 [mm] | |
b = Body thickness | 2.5 [mm] | |
Ø d = Bore diameter | 30 [mm] | |
Z = No. of teeth | 32 | |
NL = Pin holes | 2/10/60 + 2/9/46 + 2/9,5/46,5 + 2/7/42 | |
Hook angle = Hook angle | 20 [°] | |
Corner∡ = Corner angle | 10 [°] | |
Tooth geometry = Tooth configuration | WS | |
LEUCODUR = Cutting material | HL Board 20 | |
L = Delivery Status | ||
Dimensions entered are not listed?
available from stock |