192273 - NF-Chop Saw Blades HW - profiles "G7"
Technical data
Description
Machine / Application
- clipping and miter saws
- table saws
- clipping and miter cuts in PVC profiles
- for burr-free and smooth cuts in aluminum window and façade profiles
Design
- positive or negative hook angle
- tooth configuration: "G7"
- cutting material: HW HL Board 06
Advantages
- reduced cutting pressure thanks to group tooth geometry
- excellent burr-free cuts with low roughness thanks to tooth partition
- extremely noise-reduced thanks to special laser ornaments
- increased edge life compared to chop saw blades with tooth configuration "TR-F"
- increased performance and economic efficiency
Notes
- Secure workpiece clamping required
- Max. wall thickness 5 mm
Feature | Value | |
---|---|---|
Ø D = Cutting circle diameter | 350 [mm] | |
B = Cutting width | 3,8 [mm] | |
b = Body thickness | 3.2 [mm] | |
Ø d = Bore diameter | 40 [mm] | |
Z = No. of teeth | 84 | |
NL = Pin holes | 4/12/64 + 2/9/55 | |
Hook angle = Hook angle | -6 [°] | |
Tooth geometry = Tooth configuration | G7 | |
Cutting quality* = Cutting quality | ▲▲▲▲ | |
LEUCODUR = Cutting material | HL Board 06 | |
L = Delivery Status | ||
Machine/Type | Eisele LSM II, -LSM II-PV, -VA-L, Graule, Ulmia, Weidmann | |
Dimensions entered are not listed?
available from stock |