189274 - Gang-Rip Saw Blades HW with HW-rakers - solid "F"
Technical data
Description
Machine / Application
- gang-rip saws with one or two shafts
- for longitudinal cuts in wet and dry soft woods
Design
- tooth configuration: flat "F"
- cutting material: HW HL Board 20
Advantages
- tungsten carbide rakers prevent the sides of the wood from making contact with the steel plate
Notes
- for inquiries / orders enclose specification sheet (see appendix)
- for cutting height > 50 mm
Feature | Value | |
---|---|---|
Ø D = Cutting circle diameter | 500 [mm] | |
B = Cutting width | 4,6 [mm] | |
b = Body thickness | 3.3 [mm] | |
Ø d = Bore diameter | 50 [mm] | |
Ø dmax = Maximum bore diameter | 100 [mm] | |
Max. flange Ø = Max. flange diameter | 180 [mm] | |
Z = No. of teeth | 28 | |
Number of rakers = Number of rakers | 2+2+2 [pc.] | |
Hook angle = Hook angle | 20 [°] | |
Tooth geometry = Tooth configuration | F | |
LEUCODUR = Cutting material | HL Board 20 | |
L = Delivery Status | ||
Dimensions entered are not listed?
available from stock |