189271 - Gang-Rip Saw Blades HW with HW-rakers - solid "F"
Product
Drawing
-
-
- Tungsten Carbide [HW]
Technical data
Description
Machine / Application
- gang-rip saws with one or two shafts
- for longitudinal cuts in wet and dry soft woods
Design
- tooth configuration: flat "F"
- cutting material: HW HL Board 20
Advantages
- tungsten carbide rakers prevent the sides of the wood from making contact with the steel plate
Notes
- for inquiries / orders enclose specification sheet (see appendix)
- for cutting height > 50 mm
| Feature | Value | |
|---|---|---|
| Ø D = Cutting circle diameter | 350 [mm] | |
| B = Cutting width | 3,5 [mm] | |
| b = Body thickness | 2.4 [mm] | |
| Ø d = Bore diameter | 50 [mm] | |
| Ø dmax = Maximum bore diameter | 100 [mm] | |
| Max. flange Ø = Max. flange diameter | 140 [mm] | |
| Z = No. of teeth | 20 | |
| Number of rakers = Number of rakers | 2+2 [pc.] | |
| Hook angle = Hook angle | 20 [°] | |
| Tooth geometry = Tooth configuration | F | |
| LEUCODUR = Cutting material | HL Board 20 | |
| L = Delivery Status | ||
|
Dimensions entered are not listed?
available from stock |
||
