188098 - Gang-Rip Saw Blades HW with HW-rakers "F"
Technical data
Description
Machine / Application
- molders
- gang-rip saws with one or two shafts
- for longitudinal cuts in wet and dry soft woods
Design
- tooth configuration: flat "F"
- cutting material: HW HL Board 20
- type A and C with staggered double keyways
Advantages
- tungsten carbide rakers prevent the sides of the wood from making contact with the steel plate
- staggering the types (A-C-A etc.) on the shaft creates a cut division that puts less pressure on the machine
Notes
- for inquiries / orders enclose specification sheet (see appendix)
- for cutting height > 50 mm
Feature | Value | |
---|---|---|
Ø D = Cutting circle diameter | 200 [mm] | |
B = Cutting width | 2,4 [mm] | |
b = Body thickness | 1.6 [mm] | |
Ø d = Bore diameter | 40 [mm] | |
Ø dmax = Maximum bore diameter | 75 [mm] | |
Max. flange Ø = Max. flange diameter | 115 [mm] | |
Z = No. of teeth | 16 | |
Number of rakers = Number of rakers | 2 [pc.] | |
Hook angle = Hook angle | 20 [°] | |
Tooth geometry = Tooth configuration | F | |
LEUCODUR = Cutting material | HL Board 20 | |
L = Delivery Status | ||
Dimensions entered are not listed?
available from stock |