189645 - Gang-Rip Saw Blades HW with internal HW-rakers - solid "WS"
Technical data
Description
Machine / Application
- table saws
- climb-cutting rip saws
- suitable for manual feed
- for ripping and cross cuts in wet and dry solid woods
Design
- tooth configuration: alternate top bevel "WS"
- cutting material: HW HL Board 20
- 4 internal spurs HW
Advantages
- tungsten carbide rakers prevent the sides of the wood from making contact with the steel plate
- chip limiter design for universal application
Notes
- for inquiries / orders enclose specification sheet (see appendix)
Feature | Value | |
---|---|---|
Ø D = Cutting circle diameter | 450 [mm] | |
B = Cutting width | 4,2 [mm] | |
b = Body thickness | 2.8 [mm] | |
Ø d = Bore diameter | 30 [mm] | |
Ø dmax = Maximum bore diameter | 80 [mm] | |
Max. flange Ø = Max. flange diameter | 160 [mm] | |
Z = No. of teeth | 36 | |
Number of rakers = Number of rakers | 2+2 [pc.] | |
NL = Pin holes | 2/7/42 + 2/9,5/46,5 + 2/10/60 | |
Hook angle = Hook angle | 20 [°] | |
Corner∡ = Corner angle | 10 [°] | |
Tooth geometry = Tooth configuration | WS | |
LEUCODUR = Cutting material | HL Board 20 | |
L = Delivery Status | ||
Dimensions entered are not listed?
available from stock |