189643 - Gang-Rip Saw Blades HW with internal HW-rakers - solid "WS"
Product
Drawing
-
-
- Tungsten Carbide [HW]
Technical data
Description
Machine / Application
- table saws
- climb-cutting rip saws
- suitable for manual feed
- for ripping and cross cuts in wet and dry solid woods
Design
- tooth configuration: alternate top bevel "WS"
- cutting material: HW HL Board 20
- 4 internal spurs HW
Advantages
- tungsten carbide rakers prevent the sides of the wood from making contact with the steel plate
- chip limiter design for universal application
Notes
- for inquiries / orders enclose specification sheet (see appendix)
| Feature | Value | |
|---|---|---|
| Ø D = Cutting circle diameter | 350 [mm] | |
| B = Cutting width | 3,5 [mm] | |
| b = Body thickness | 2.5 [mm] | |
| Ø d = Bore diameter | 30 [mm] | |
| Ø dmax = Maximum bore diameter | 70 [mm] | |
| Max. flange Ø = Max. flange diameter | 140 [mm] | |
| Z = No. of teeth | 24 | |
| Number of rakers = Number of rakers | 2+2 [pc.] | |
| NL = Pin holes | 2/7/42 + 2/9,5/46,5 + 2/10/60 | |
| Hook angle = Hook angle | 20 [°] | |
| Corner∡ = Corner angle | 10 [°] | |
| Tooth geometry = Tooth configuration | WS | |
| LEUCODUR = Cutting material | HL Board 20 | |
| L = Delivery Status | ||
|
Dimensions entered are not listed?
available from stock |
||
