189280 - Gang-Rip Saw Blades HW with cooling slots "F"
Product
Drawing
-
-
- Tungsten Carbide [HW]
Technical data
Description
Machine / Application
- molders
- gang-rip saw with one or two shafts (e.g. Raimann, Paul, Costa, ...)
- for precise ripping cuts in dry and planed hard woods
Design
- tooth configuration: flat "F"
- cutting material: HW HL Board 10
Advantages
- special design and tungsten carbide grade for highest cutting quality and very long edge lives
Notes
- for inquiries / orders enclose specification sheet (see appendix)
| Feature | Value | |
|---|---|---|
| Ø D = Cutting circle diameter | 350 [mm] | |
| B = Cutting width | 3,6 [mm] | |
| b = Body thickness | 2.4 [mm] | |
| Ø d = Bore diameter | 80 [mm] | |
| Ø dmax = Maximum bore diameter | 100 [mm] | |
| Max. flange Ø = Max. flange diameter | 140 [mm] | |
| Z = No. of teeth | 32 | |
| Number of cooling slots = Number of cooling slots | 4 [pc.] | |
| DKN = Double keyway | 18,5x5 [mm] | |
| NL = Pin holes | 6/5,5/91 + 4/6,6/95 + 2/13/100 | |
| Hook angle = Hook angle | 20 [°] | |
| Tooth geometry = Tooth configuration | F | |
| LEUCODUR = Cutting material | HL Board 10 | |
| L = Delivery Status | ||
|
Dimensions entered are not listed?
available from stock |
||
