189277 - Gang-Rip Saw Blades HW with cooling slots "F"
Product
Drawing
-
-
- Tungsten Carbide [HW]
Technical data
Description
Machine / Application
- molders
- gang-rip saw with one or two shafts (e.g. Raimann, Paul, Costa, ...)
- for precise ripping cuts in dry and planed hard woods
Design
- tooth configuration: flat "F"
- cutting material: HW HL Board 10
Advantages
- special design and tungsten carbide grade for highest cutting quality and very long edge lives
Notes
- for inquiries / orders enclose specification sheet (see appendix)
| Feature | Value | |
|---|---|---|
| Ø D = Cutting circle diameter | 300 [mm] | |
| B = Cutting width | 3,4 [mm] | |
| b = Body thickness | 2.2 [mm] | |
| Ø d = Bore diameter | 30 [mm] | |
| Ø dmax = Maximum bore diameter | 100 [mm] | |
| Max. flange Ø = Max. flange diameter | 130 [mm] | |
| Z = No. of teeth | 28 | |
| Number of cooling slots = Number of cooling slots | 4 [pc.] | |
| Hook angle = Hook angle | 20 [°] | |
| Tooth geometry = Tooth configuration | F | |
| LEUCODUR = Cutting material | HL Board 10 | |
| L = Delivery Status | ||
|
Dimensions entered are not listed?
available from stock |
||
