193266 - Gang-Rip Saw Blades HW with HW-rakers - topline solid "F"
Technical data
Description
Machine / Application
- Gang rip machine with low feed rates
- Gang-rip machines with one or two shafts
- for longitudinal cuts in wet and dry solid woods
Design
- Tooth configuration: flat tooth "F"
- Cutting material: HW HL Board 20
- with internal and external HW rakers
- Body with and without clean out tooth
Advantages
- tungsten carbide rakers prevent the sides of the wood from making contact with the steel plate
- optimal chip evacuation thanks to special design
- particularly robust design
Notes
Feature | Value | |
---|---|---|
Ø D = Cutting circle diameter | 350 [mm] | |
B = Cutting width | 4,2 [mm] | |
b = Body thickness | 2.8 [mm] | |
Ø d = Bore diameter | 50 [mm] | |
Ø dmax = Maximum bore diameter | 100 [mm] | |
Max. flange Ø = Max. flange diameter | 140 [mm] | |
Z = No. of teeth | 18+18 | |
Number of rakers = Number of rakers | 2+2 [pc.] | |
Hook angle = Hook angle | 22 [°] | |
Tooth geometry = Tooth configuration | F | |
LEUCODUR = Cutting material | HL Board 20 | |
L = Delivery Status | ||
Dimensions entered are not listed?
available from stock |