192476 - Clipping Saw Blades HW for edge trimming "WS" - nn-System without countersink
Product
Drawing
-
-
- Tungsten Carbide [HW]
-
Technical data
Description
Machine / Application
- edge banders
- edge trimming machines
- for trimming of plastic-, veneer- and solid wood edges
Design
- special NoNoise gullet geometry
- positive or negative hook angle
- with or without shear angle
- tooth configuration: alternate top bevel "WS"
- cutting material: HW HL Board 06
Advantages
- especially low noise level
- noise reduction by approx. 6 dB(A) when idling
Notes
| Feature | Value | |
|---|---|---|
| Ø D = Cutting circle diameter | 100 [mm] | |
| B = Cutting width | 2,6 [mm] | |
| b = Body thickness | 1.6 [mm] | |
| Ø d = Bore diameter | 32 [mm] | |
| Z = No. of teeth | 30 | |
| Hook angle = Hook angle | 10 [°] | |
| Corner∡ = Corner angle | 15 [°] | |
| Shear∡ = Shear angle | 5 [°] | |
| Tooth geometry = Tooth configuration | WS | |
| Machine | Brandt | |
| Cutting quality* = Cutting quality | ▲▲ | |
| LEUCODUR = Cutting material | HL Board 06 | |
| L = Delivery Status | ||
| Machine/Type | Brandt | |
|
Dimensions entered are not listed?
available from stock |
||
