192480 - Clipping Saw Blades HW for edge trimming "WS" - nn-System, with countersink
Product
Drawing
-
-
- Tungsten Carbide [HW]
-
Technical data
Description
Machine / Application
- edge trimming machines
- for trimming of plastic-, veneer- and solid wood edges
Design
- special NoNoise gullet geometry
- positive hook angle
- with or without shear angle
- pin holes with countersink
- tooth configuration: alternate top bevel "WS"
- cutting material: HW HL Board 06
Advantages
- especially low noise level
- noise reduction by approx. 6 dB(A) when idling
Notes
- Ident-No. 192494 NL=4/5,5/52 have no countersink
- sense of rotation according to VDMA 8849
| Feature | Value | |
|---|---|---|
| Ø D = Cutting circle diameter | 110 [mm] | |
| B = Cutting width | 3,2 [mm] | |
| b = Body thickness | 2.5 [mm] | |
| Ø d = Bore diameter | 40 [mm] | |
| Z = No. of teeth | 20 | |
| NL = Pin holes | 4/5,5/52 | |
| Hook angle = Hook angle | 10 [°] | |
| Corner∡ = Corner angle | 45 [°] | |
| L/R = cutting direction | L | |
| Shear∡ = Shear angle | 5 [°] | |
| Tooth geometry = Tooth configuration | WS | |
| Cutting quality* = Cutting quality | ▲▲▲ | |
| LEUCODUR = Cutting material | HL Board 06 | |
| L = Delivery Status | ||
| Machine/Type | Homag | |
|
Dimensions entered are not listed?
available from stock |
||
